,标记涂料

产品分类

热门关键词

联系我们

企业名称:无锡优航动力科技有限公司

联系人:万女士

电话:0510-88270899

手机:13814298389

邮箱:wanlili8810@163.com

传真:0510-88270899

地址:无锡市新吴区纺城大道299号

网址:www.yura-aviation-power.com

玻璃润滑剂

您的当前位置: 首 页 >> 锻造玻璃润滑剂 >>

玻璃润滑剂

  • 所属分类:锻造玻璃润滑剂

  • 点击次数:
  • 发布日期:2018/09/25
  • 在线询价
详细介绍产品清单涂料简介 Email 打印

WATER BASED GLASS PROTECTIVE AND LUBRICATING COATINGS

 水性玻璃保护和润滑涂料

Precision Forging精锻

Extrusion挤压

Billet Breakdown & Hot Rolling开钢坯&热轧

Ingot Breakdown开钢锭

Hot Pressing热压

 

Selection Guide for OXYLUB-LUBE选型指南:

----Forging / Extrusion / Rolling / Pressing锻造/挤压/滚压/冲压

Metal

金属材料类型

Hot   Working

Temp.   In Degree F

热加工温度℉

Recommended   Coating

推荐使用涂料

Recommended   Thickness Dry Film

推荐膜厚

Comments

说明

Titanium Alloys

钛合金

1500-1800

1850-2050

Oxylub-327

Oxylub-811

1-3 mils密尔

1-3 mils

Oxidation resistance 抗氧化

Excellent metal movement. 优良的金属运动

Retards hydrogen penetration.阻碍氢渗透。

Improves die life. 改善模具寿命

Excellent firing range. 优良的燃烧范围。

Thermal stability.热稳定性

Super Alloys

超合金

1850-2200

Oxylub-709

1-5 mils密尔

Excellent metal movement. 优良的金属运动。

Oxidation resistant. 抗氧化Insulating properties. 绝缘性能

Reduced secondary finishing.减少二次抛光

Heat retention. 保暖性

Thermal stability. 热稳定性

Stainless Steel

不锈钢

1900-2300

Oxylub-921

1-3 mils密尔

Excellent metal movement. 优良的金属运动。

Oxidation resistant. 抗氧化

----Ingot Breakdown 开坯

Titanium   Alloys

钛合金

1600-1850

1700-2300

ATP-707

ATP-708

3-10   mils密尔

5-10   mils

Boron-Free无硼  

Slip Resistance.防滑

Oxidation   Resistance.抗氧化

Super   Alloys

高温合金

1900-2300

ATP-790

3-10   mils密尔

Insulating   Properties. 绝缘性能Oxidation Resistance.抗氧化

 

Description产品描述:

An advanced group of water-base, lead-free coatings specially formulated to protect, insulate, and lubricate metals during forging and other hot working operations. Coatings are available for following metals:

Titanium Alloys

Stainless Steels

Super Alloys

先进的无铅水性涂料,配方独特,可以在锻造和其他热加工工序中保护、绝缘和润滑金属。涂料适用于以下金属:

钛合金

不锈钢

高温合金

 

The coatings are applied prior to heating for rolling, forging, hot extruding, annealing and other hot-working operations.

该涂料在滚压/锻造/热挤/退火及其他热加工工序加热前使用。

 

OXY-LUB coatings are user/environmentally friendly and require no special handling. The coatings can be readily adjusted to meet the requirements of hot working operations.

OXY-LUB涂料无毒无污染,不需要特殊处理。方便调整以满足热加工工序的要求

 

Protecting metals during “hot working” can be very cost effective. ATP water based coatings are engineered to control the diffusion of gases into and out of metals. The coatings provide excellent metal movement while controlling surface oxidation. Customized formulations to maximize efficiencies and cost-effectiveness.

在热加工过程保护好金属非常具有成本效益。ATP水基涂料的设计旨在控制金属内外气体的扩散。该涂料在控制表面氧化的同时可以帮助改善金属的流动。定制的配方使效率和成本效益最大化。

 

Advantage: 优势

Water based and lead-free to minimize problems associated with solvents and hazardous materials.

水基和无铅把溶剂和有害物质的问题降到最低。

 

Excellent lubricating properties to aid metal wetting and movement.

优良的润滑性能可以帮助改善金属的润湿和流动。

 

Minimizes surface defects and secondary finishing costs…pickling, sand blasting, and grinding.

最大化减少表面缺陷和二次抛光成本…酸洗、喷砂和研磨。

 

Controls oxidation by preventing gaseous contamination. Retards hydrogen penetration on titanium alloys.

通过防止气体污染控制氧化。阻碍钛合金的渗氢。

 

Coatings can be sprayed, dipped, flow-coated or brushed.

该涂料可喷涂、浸涂、流涂或刷涂。

 

Available in a wide range of viscosities to aid workability.

可在各种粘度范围内使用,帮助提高可行性。

 

Excellent green strength to allow billets to be loaded into furnace without damage to the unfused coatings.

极强的湿度,可以将坯料装进炉子而不损坏未熔化的涂料。

 

Extends die life while improving finished quality.

改善表面质量的同时延长模具寿命。

 

Formulated to be slip-resistant for rolling operations.

对滚压有防滑作用。

 

How to use the coatings: 涂料的使用

Mixing Instructions: For best results, the coatings should be well suspended and mixed. Coatings supplied at viscosity which can be adjusted for most coating techniques and processes. The viscosity can be adjusted with water and thickness.

混合说明:为达到最佳效果,涂料应进行很好的悬浮和混合。涂料粘度可以根据大多数涂层技术和工艺进行调整。粘度可随水和厚度调整。

为达到最佳效果,涂料应充分搅匀。该防护涂料的粘稠度适用于大部分涂层技术和工艺。其稠度也可以用水调节。

 

Metal Preparation: Metal surfaces must be free of dirt, oil grease and loose scale for best results.

金属准备:金属表面必须不含污垢、油脂和疏松度,以获得最佳效果。

 

How to Apply: The water based coatings can be sprayed with conventional, electrostatic or airless spray systems. They may also be flow coated, dipped, or brushed.

如何应用:水性涂料可用常规的、静电的或无空气的喷涂系统进行喷涂,也可以流涂、浸涂或刷涂。

 

Thickness: The proper thickness depends on the metal to be processed, time and temperature. Coating thickness is most important and must be controlled.

厚度:合适的厚度取决于待加工的金属,时间和温度。涂料厚度是最重要的,必须进行控制。

 

Drying: The coatings are water based and should be dried. They can be applied to pre-heated metal up to temperatures of 150-200℉. They can be air dried. Special formulations will allow charging into furnace while the coating is still wet. The coating will dry to a hard film with excellent film strength. This will minimize damage to coating prior to entering the furnace.

干燥:涂料是水性的,需要进行干燥。该涂料可以施涂到预热到150-200℉的金属上。可以风干。特殊配方的涂料允许在涂层未干的情况下装入热处理炉(进行热处理)。涂料干燥后形成硬膜并具有很好的强度。这将减少进炉前对涂层的损害。


本文网址:http://www.yura-aviation-power.com/product/561.html

关键词:

上一篇:没有了
下一篇:Oxylub-719

最近浏览:

欢迎给我们留言
请在此输入留言内容,我们会尽快与您联系。
姓名
联系人
电话
座机/手机号码
邮箱
邮箱
地址
地址