,标记涂料

产品分类

联系我们

企业名称:无锡优航动力科技有限公司

联系人:万女士

电话:0510-88270899

手机:13814298389

邮箱:wanlili8810@163.com

传真:0510-88270899

地址: 无锡市新吴区净慧东道66号

网址:www.yura-aviation-power.com

武汉金属抗氧化涂料

您的当前位置: 首 页 >> 武汉金属抗氧化涂料 >>

武汉金属抗氧化涂料

  • 所属分类:武汉金属抗氧化涂料

  • 点击次数:
  • 发布日期:2018/09/25
  • 在线询价
详细介绍产品清单涂料简介 Email 打印

Oxidation Resistant Protective Coatings For Metals

金属类抗氧化防护涂料

 

Application Guide For Oxidation Resistant Coatings应用指南

Metals

金属

Temp. F

温度(华氏度)

Recommended Coating

推荐涂料

Coating Thickness Dry Film

图层厚度(干膜下)

Comments

备注

Stainless Steels

不锈钢

1000-2400

1800-2400

ATP 641

ATP 607

 

5-10 mils

密尔

Controls rolled in scale.控制氧化皮

Reduces surface defects.减少表面缺陷

Reduces secondary finishing.减少二次表面光饰

Oxidation resistance.抗氧化性

Tools Steels

工具钢

1000-2200

ATP 304

10-20 mils

密尔

Controls decarb.

Oxidation resistance.抗氧化性

Reduces secondary finishing. .减少二次表面光饰

Slip resistant.防滑落

Low Alloy and Carbon Steels

低合金钢和碳钢

1400-1900

1000-2400

1950-2350

ATP 504

ATP 641

ATP 505

10-20 mils

密尔

Oxidation resistance. 抗氧化性

Retards formation of oxide scale.

减缓氧化皮的生成

Inexpensive method to improve yields and reduce metal   loss.

提高产量和减少金属损失的不昂贵的方法

Controls rolled in scale.氧化皮控制

Titanium Alloys

钛合金

1400-1800

1800-2400

ATP 707

ATP 708

5-10 mils

10-20 mils

密尔

Oxidation resistance. 抗氧化性

Boron-free.不含硼

Controls hydrogen penetration.渗氢控制

Slip resistant. 防滑落

Molybdenum and Zirconium Alloys

钼锆合金

1800-2300

ATP 808

3-10 mils

密尔

Controls smoking.控制烟雾

Oxidation resistance. 抗氧化性

 

General Data基本参数:

Containers: 1 gallon, 5 gallon and 55 gallon drums.

包装:1加仑,5加仑,55加仑

Storage: No special precautions

储存:不需要特殊预防措施

Containers: Pints, 1 gallon, 5 gallon and 55 gallon

包装:品脱装,1加仑,5加仑,55加仑

Shelf Life: over one year

保存期:超过1年

 

Description产品描述:

ATP coatings are advanced, water-based, non-hazardous and cost-effective metal protection systems. They are formulated to protect metals and alloys from oxidizing or contamination atmospheres at high temperatures for extended times. The coatings prevent the diffusion of gases into and out of the metals.

ATP涂料是先进的水基无害低成本高效金属防护系统。它们可以保护金属和合金在高温下的氧化性气氛或者污染气氛中延长氧化时间。该涂层能阻止气体渗入渗出金属。

 

The water-based coatings are applied prior to heating for rolling, forging, hot-extruding, annealing or other heat treatments.该水基涂层在轧制,锻造,热挤压,退火和其他热处理工艺的加热前施涂。

 

ATP coatings are formulated to protect: ATP涂层能保护:

Tool steels 工具钢

Stainless Steels 不锈钢

Nickel Alloys 镍基合金

Carbon and low Alloys 碳钢和低合金钢

Zirconium Alloys 锆合金

Titanium Alloys 钛合金

Molybdenum 钼合金

 

ATP coatings are cost effective because they retard the formation of oxide scale, reduce surface rejects, minimizes secondary finishing operations, reduce the loss of valuable metal while improving product quality. ATP涂层是低成本的,因为它们阻碍了氧化皮的形成,减少了表面缺陷的形成,最少化了二次光饰工序,减少了金属损失,提高了产品质量。

 

Advantages:优点

Stainless Steels: 不锈钢

Minimizes formation of oxide scale 使氧化皮的生成最小化

Reduces surface defects 减少表面缺陷

Reduces secondary finishing operations减少二次光饰工序

Spalls on cooling 冷却后可以裂开

 

Tool Steels:工具钢

Controls decarburization 控制渗碳

Retards formation of oxide scale 阻碍氧化皮的生成

Reduces forged or rolled in scale 减少锻造或者轧制氧化

Reduces secondary finishing operations减少二次光饰工序

Improves yields 提高产量

 

Titanium Alloys:钛合金

Controls hydrogen penetration 控制渗氢

Provides heat distribution and metal movement 提供热分布和金属流动

Minimizes surface defects controls alpha case 最小化表面缺陷,阿尔法层形成

 

Molybdenum and Zirconium Alloys: 钼和锆合金

Oxidation resistance 抗氧化型

Smoke resistance 抗烟雾性

 

All coatings have excellent green strength to allow the coated parts to be loaded into the furnace without damage to the unfused coatings. 所有涂层具有优良的强项,即允许涂后的零件装入热处理炉子而不破坏涂层。

 

How to use the coatings: 如何使用涂层

Mixing Instructions: For best results, the coatings should be well suspended and mixed. Coatings supplied at viscosity which can be adjusted for most coatings techniques and processes. The viscosity can be adjusted with water and electrolytes.

配制说明:为达到最佳效果,涂料应充分搅匀。该防护涂料的粘稠度适用于大部分涂层技术和工艺。其稠度也可以用水或者电解液调节。

 

Metal Preparation: Metal surfaces must be free of dirt, oil, grease and loose scale for best results.

金属准备:金属表面必须无脏污,无油脂,无疏松的氧化皮。

 

How to apply: The water based coatings can be sprayed with conventional, electrostatic or airless spray systems. May also be flow coated, dipped or brushed.

如何施涂:水性涂料可用传统的、静电的或无空气的喷涂系统进行喷涂,也可以流涂、浸涂或刷涂。

 

Thickness: The proper thickness depends on the metal to be processed, time and temperature. Coating thickness is most important and must be controlled.

厚度:合适的厚度取决于金属待加工时间和温度。涂料厚度是最重要的,必须进行控制。

 

Drying: The coatings are water based and should be dried. They can be applied to preheated metal up to temperatures of 150-200 F. They can be air dried or dried in a drier. Special formulations will allow charging into furnace while the coating is still wet. The coating will dry to a hard finish with excellent green strength. This will minimize damage to the coating prior to entering the furnace.

干燥:涂料是水性的,需要进行干燥。该涂料可以施涂到预热到150-200℉的金属上。可以风干或者用干燥机干燥。特殊配方的涂料允许在涂层未干的情况下装入热处理炉(进行热处理)。涂料干燥后形成硬膜并具有很好的强度。这将减少进炉前对涂层的损害。

 


本文网址:http://www.yura-aviation-power.com/product/563.html

关键词:

上一篇:没有了
下一篇:武汉Heatres-8000

最近浏览:

欢迎给我们留言
请在此输入留言内容,我们会尽快与您联系。
姓名
联系人
电话
座机/手机号码
邮箱
邮箱
地址
地址